Commissioning
5.4 Establishing a Bluetooth connection (SIMATIC MV325)
5.4
Establishing a Bluetooth connection (SIMATIC MV325)
Note
Using the SIMATIC MV325 in an area where there is WLAN communication
If you use the SIMATIC MV325 in an area where there is WLAN communication, this may
result in interference. We therefore recommend that you select the 5 GHz frequency range
for the WLAN communication and take this into account in the radio field planning.
Establishing the connection
To establish a Bluetooth connection from the charging station with the integrated Bluetooth
modem:
1. Slide the switch for the communication mode
the right in the direction of the arrow.
2. Scan in the QuickConnect code
charging/Bluetooth modem station or on the external Bluetooth modem.
While the connection is being established, the symbol for a wireless connection
top of the reader flashes.
The blue LED
the connection is being established. As soon as the connection has been established
successfully, the blue LED
The reader beeps once and the wireless symbol
①
②
③
④
⑤
⑥
28
②
on the charging station or on the Bluetooth modem also flashes while
Communication mode switch
Blue LED
QuickConnect code
Wireless symbol
Read confirmation
Memory symbol
①
on the bottom of the charging station to
③
. The QuickConnect code is on the front of the
②
is lit permanently.
④
Operating Instructions, 08/2015, C79000-G8976-C352-03
is lit constantly.
SIMATIC MV320 / SIMATIC MV325
④
at the