Siemens SIMATIC MV320 Operating Instructions Manual page 4

Preface
Purpose of the operating instructions
Note
The operating instructions contain all the important information about the device
Read the operating instructions before starting to work with this device.
Noting and acting on this information:
• Ensures the device functions correctly
• Saves you service costs
These operating instructions contain all the information you need for commissioning and
using the device.
It is intended both for persons who connect up the device electrically and commission and
operate it as well as for service technicians and maintenance technicians.
New in this release
● Revision of contents and editing
● Code configuration section updated and removed from manual.
Replaced operating instructions
These operating instructions replace the operating instructions edition 03/2014.
Current operating instructions on the Internet
You will also find the latest version of these operating instructions on the Internet pages of
Siemens Industry Online Support under the following entry ID:
78905254 (https://support.industry.siemens.com/cs/ww/en/view/78905254)
Additional documentation
A current list of the code configurations mentioned in this manual is available in the manuals:
● SIMATIC MV320 Configuration guide
(https://support.industry.siemens.com/cs/ww/en/ps/15160/man)
● SIMATIC MV325 Configuration guide
(https://support.industry.siemens.com/cs/ww/en/ps/15161/man)
Environmental protection
Devices described in this programming manual can be recycled owing to the low content of
noxious substances in their version. Please contact a certified waste disposal company for
eco-friendly recycling and to dispose of your old devices.
4
SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03