Using The Baking Tray; Before Initial Use - Silvercrest SGB 1200 A1 Operating Instructions Manual

To remove the hot rack 9, hook the tongs q
■
onto it as follows:
Fig. 4: Hooking the tongs q onto the rack 9

Using the baking tray

WARNING! RISK OF INJURY!
► Always use oven gloves or similar to insert
the hot baking tray 0 into the appliance or
to remove it.
Always place the baking tray 0 on the cor-
■
rectly inserted rack 9 in the cooking chamber
of the appliance.
CAUTION! MATERIAL DAMAGE!
Never place the baking tray 0 directly onto
►
the heating elements.
SGB 1200 A1

Before initial use

Once the appliance is set up correctly:
1) Insert the plug into a mains power socket.
2) Turn the temperature control 3 clockwise to
the maximum temperature (to the limit stop).
3) Turn the function switch 4 to "top and bottom
heat" .
4) Open the glass door and leave it open for this
operation.
5) Remove any installed accessories from the
cooking chamber.
6) Turn the timer 5 to 20 minutes.
NOTE
► The fi rst time the appliance heats up, a small
amount of smoke and odour may be gener-
ated due to production-related residue. This is
normal and is completely harmless.
Provide suffi cient ventilation; for example, by
opening a window.
The appliance switches off automatically
after 20 minutes.
If you want to interrupt the heating process
prematurely, turn the temperature control 3
counter-clockwise to the limit stop and set
the function switch 4 to
timer 5 to "OFF".
7) Allow the appliance to cool down, then clean
the appliance as described in the section
"Cleaning and care".
The appliance is now ready for use.
and set the
OFF
55
GB
MT