Connecting An External Receiver/Amp - Vizio VP50 HDTV20A User Manual

2.6 Connecting an external Receiver/Amp

1. Turn off the power to the LCD HDTV
and Receiver/Amp.
2. Using an audio cable (white and red
connectors), connect the cable to the
audio input
Receiver/Amp and connect the other
end to the ANALOG OUT (white
area) audio connectors at the rear of
the LCD HDTV.
3. Turn on the power to the LCD HDTV
and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-
Screen Display (OSD) menu.
5. Press the
6. Press the
7. Press the
HDTV will now be routed through your Receiver/Amp system.
Press either the MENU key to return to the previous menu display or the EXIT key to return
to your program if task has been completed.
Note:
a) Refer to your Receiver/ Amp user manual to select the corresponding audio input.
b) The audio output is not amplified and can not be connected directly to external
speakers.
Optical Output of Audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (gray area) at the rear of the Plasma HDTV. This is active when receiving digital audio with
the programs from the DTV/TV CABLE/ANTENNA input.
Version 12/28/2007
connectors on the
button on the remote control to select the Audio Adjust menu.
button on the remote control to select SPEAKERS.
button on the remote control to select OFF so that the sound from the LCD
www.VIZIO.com
VIZIO VP50 HDTV20A User Manual
27