Using S-Video (Av3); Using Composite (Av) Video - Vizio VP50 HDTV20A User Manual

2.5.3 Using S-Video (AV3)

Connecting your DVD Player (Good):
1. Turn off the power to the HDTV and DVD player.
2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV3 input
on the rear of the HDTV.
3. Connect an audio cable (white and red connectors) to the audio output connectors
associated with the S-Video output on your DVD player and to the audio connectors
associated with the AV3 input on the rear of the HDTV.
4. Turn on the power to the HDTV and DVD player.
5. Select AV3 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control as many times as needed to get AV3 (S-
Video) display on the screen.

2.5.4 Using Composite (AV) Video

Connecting your DVD Player (Good) :
1. Turn off the power to the HDTV and DVD player.
2. Connect the Video (yellow color) connector on your DVD player to the
Video (yellow color) connector to either AV1 (yellow color area) or
AV2 (orange color area) group.
3. Connect the R (red color) and L (white color) audio connectors on
your DVD player to the corresponding R (red color) and L (white
color) audio input connectors in the AV2 group (orange color area).
4. Turn on the power to the HDTV and DVD Player.
5. Select AV1 or AV2 by using the INPUT button on the remote or
side of the HDTV, or directly by pressing the AV button on the
Remote Control.
Note: Refer to your DVD player User's Manual for more information about the video output requirements
of the product.
Version 12/28/2007 25
www.VIZIO.com
VIZIO VP50 HDTV20A User Manual