VlZlOVA370M UserManual
If your soundsystemhas a SPDIF(optical)digital audioinput you can connectit to the optical
DIGITAL AUDIOOUT(whitearea)at the rearof the TV. Thisis activewhenreceiving audiowiththe
programs b eingviewed nomatter w hatinputis beingused.
.
2.
.
4.
.
.
.
.
Turn off the power to the HDTV and Receiver/Amp.
Using an audio cable (optical cable), connect the cable to the audio input connectors on the
Receiver/Amp
and connect the other end to the OPTICAL OUT (white area) audio connectors
at the rear of the LCD HDTV.
Turn
on the
power
to the
HDTV
and
Receiver/Amp.
Then press the MENU/SELECT
button on
the remote control
to bring up the On-
Screen Display (OSD) menu.
Press V
button on the remote control to
select the Audio menu.
Press !_ on the remote control to enter the
Audio sub-menu.
Press the V
button to
highlight SPEAKERS.
Press MENU/SELECT
key to select Off so
that the sound from the TV will now be
routed through your Receiver/Amp
system.
Press EXIT key to exit the menu display.
Note:
o
o
Refer to your Receiver/Amp user manual to select the corresponding audio input.
The audio output is not amplified and cannot be connected directly to external speakers.
28
www.VmZmO.com