Graco SaniSpray HP 20 Operation - Repair - Parts page 9

GROUNDING
This product must be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electric current. This product is
equipped with a cord having a grounding wire with an appropriate grounding plug. The plug
must be plugged into an outlet that is properly installed and grounded in accordance with all
local codes and regulations.
•
Improper installation or modification of the grounding plug can result in electric shock.
•
This product is for use on a nominal 120V or 230V circuit and has a grounding plug similar
to the plug illustrated below.
•
Only connect the product to an outlet having the same configuration as the plug.
•
Do not modify the plug provided; if it does not fit the outlet, have the proper outlet installed
by a qualified electrician.
•
Do not use an adapter with this product.
•
When repair or replacement of the cord or plug is required, do not connect the grounding
wire to either flat blade terminal.
•
The wire with insulation having an outer surface that is green with or without yellow stripes
is the grounding wire.
•
Check with a qualified electrician or serviceman when the grounding instructions are not
completely understood, or when in doubt as to whether the product is properly grounded.
Extension Cords:
•
Use only a 3-wire extension cord that has a grounding plug and a grounding receptacle that
accepts the plug on the product.
•
When using the sprayer outdoors, use an extension cord suitable for outdoor use.
•
Make sure your extension cord is not damaged.
•
When using an extension cord, be sure to use a cord heavy enough to carry the current that
your sprayer draws. An undersized cord results in a drop in line voltage and loss of power
and overheating. When in doubt use the next heavier gauge. The smaller the gauge
number the heavier the cord. See chart for appropriate sizes and lengths:
AWG (American Wire Gauge)
3A7646F
120V US
Conductor Size
16
12
WARNING
230V
Metric
2
1.5 mm
2
2.5 mm
Warnings
Length
Maximum
25 ft. (8 m)
50 ft. (15 m)
9