Trouble Shooting - Gazer TV22-HS2 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
In case the TV set operates incorrectly, it is necessary to reboot the device. To reboot the TV set, unplug the power-supply cable from the mains, wait for 15 seconds and
plug the cable in the mains again. If the fault is not eliminated, it is necessary to reset the device to the factory settings.
EN
After the factory resetting, all the data (booted applications and accounts) will be deleted.
Note:
In case of any troubles, which are not described in the user manual or this installation manual, it is necessary to seek assistance in the Gazer contact centre through the
feedback form at the www.gazer.com website or over the customer-service line +44 203 137 35 63�
An incorrect use of the TV set voids the purchaser's warranty.
Attention!
In case of any errors in the TV-set operation, it is necessary to consult the technicians of the Gazer centre prior to contacting or visiting the service
Snowflake spots occur on the TV images and there is noise in
accompanying sound:
Check if the antenna plug is loose or if the cable is in a good condition.
1.
Check the antenna type (VHF/UHF).
2.
Adjust the direction and position of the antenna.
3.
4.
Try to use signal enhancer�
Dotted line or strip disturbance occurs on the TV images:
Do not use electric hair dryer aside the TV set and adjust the antenna
direction to reduce disturbance�
The Android APP is not responding and does not react to
Turn OFF the device by button on the TV or disconnect the power cable
for the 20 sec�
12

Trouble Shooting

Double images occur on the TV screen:
1.
Use a high oriented antenna�
Adjust the direction of the antenna.
2.
Check the cable.
3.
No signal input images show on the TV set screen. The indicator light
is blinking:
Check if the signal connecting cable is loose or fell off. Reconnect it.
1.
The TV set may be in a standby mode, please reboot.
2.
The remote control distance is short or out of control:
button:
Remove the object to avoid blocking the remote control receiving window
and replace the battery�
centre�

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tv24-hs2Tv32-hs2Tv32-fs2Tv40-hs2Tv40-fs2Tv43-fs2

Table of Contents