First Start; Initial Setting - Gazer TV22-HS2 User Manual

The first time your device is switched on and booted up, it is necessary to fulfill the initial setting of the TV set. For this purpose, please check the pictures at the beginning
of this manual and carry out the following:
Picture 5. Language
Select the interface language. To select necessary item, use the UP/
•
DOWN buttons on the remote control joystick; in order to confirm, use
button;
the
Press the RIGHT button on the remote control joystick in order to proceed
•
to the next step.
Picture 6. Time Zone
Select the time zone according to your domestic location. It is needed for
•
showing the correct information in teletext, TV programmes information
(DVB-T/T2, DVB-S/S2, DVB-C).
Picture 7. Network
Select the wireless network, which is available in your area. Use the network
•
with the stable signal. If the Wi-Fi network is not available, please, use the
Ethernet cable�
Check out the latest software update for your Gazer TV to increase the functionality of your device. You may see system updates called «OTA updates»
Attention!
in the «Android settings». «Over the air» updates are delivered directly to your TV through Wi-Fi or Ethernet.

First start

Initial Setting

Enter the password using, the virtual keyboard and connect to the available
•
network, pressing the Connect button�
•
Choose the location for a TV use� TV will turn ON and OFF the advertising
for every 30 seconds in case you will choose the «Store». For a home use,
please choose the «Home» parameter�
Select the priority mode, when the TV set starts after turning-on;
•
• Press the RIGHT button of the remote control to complete the settings
and proceed to the use of the device�
Picture 8. Password
Picture 9. Location
Picture 10. Welcome
EN
7