Use Of The Interface; Switchover Of The Sources; Settings Menu - Gazer TV22-HS2 User Manual

EN
In order to call the list of accessible sources, press the
UP buttons on the joystick of the control panel. In order to select the required source, press the
Picture 11. Input source
– Analogue television tuner.
ATV
– Satellite television tuner.
DVB-S
– Digital television tuner.
DVB-T/C
– Input of the analogue audio-video signal.
AV
– HDMI digital audio-video inputs.
HDMI 1, 2, 3
– Input of the video signal from a PC or other devices using the
VGA
VGA video-connection type. If this input is selected, the sound is sent
from the 3.5mm line audio input (PC AUDIO), located near the VGA
connector on the lower bound of the TV set.
To enter the settings menu, use the
ATV/DVB-C/S2/T2/AV/HDMI/VGA).
The navigation between the menu items is carried out with the DOWN/UP
buttons�
To move over to a submenu, use the
To change the values or select the necessary parameters in the menu items, use
the LEFT/RIGHT or DOWN/UP buttons�
To return to the previous menu, press the LEFT or
To exit the settings menu, press the
8
button on the remote control� The navigation between the accessible sources is carried out with the DOWN/
Picture 12. Menu
button on the remote control (only for
or RIGHT button�
button�
button�

Use of the Interface

Switchover of the Sources

button�
In the Picture Setup, you may set:
Picture mode (Standard, Dynamic, Mild, User);
•
Colour Temperature (Warm, Normal, Cool);
•
DNR (OFF, Low, Middle, High, Auto);
•
Aspect Ratio (16:9, 4:3, Zoom 1, Zoom 2, Point to Point).
•
In the Sound Setup, you may set:
Sound mode (Standard, Movie, Music, User);
•
• Balance;
AVL (OFF, ON);
•
Digital Audio output (Auto, PCM, OFF).
•
Picture 13. Picture Setup
Picture Setup:
Picture 14. Sound Setup
Sound Setup: