Advertisement
Display & button description
AUTO lights up and
stays lit to indicate
Automatic Mode, blinks
to confirm end of
cooking time.
1. Minute Minder with acoustic signal selection button
2. Cooking duration selection button
3. End of cooking time selection button
4. Manual operation selection button
5. Data settings or change button
6. Data settings or change button
Setting the clock and selecting the Manual Mode
Upon installation or after a power failure digits -0:00 and AUTO both blink.
Keep buttons 2 and 3 pressed simultaneously while setting the clock through the
usage of buttons 5 and 6.
Press button 4 Manual operation selection button to proceed with the Manual
operating mode.
will light up.
Setting the Minute Minder with acoustic signal
Operates independently from oven functions.
Press button 1 digits -0:00 are displayed.
Press button 5 or 6 to display the desired cooking time.
12:00 and
light up a few seconds after buttons release.
The acoustic signal will start upon elapsing of cooking time.
Press button 1 to silence the acoustic signal.
Programming the Cooking Time
Manual operation when
lit indicates Manual Mode
is operating
Minute Minder when lit
indicates Minute
Minder is operating
Programming Duration and End of Cooking Time
Changing the time of day:
Push the manual key and the point in the middle of the display will start flashing, the time can be altered
with the “+” and “-” keys.
Changing of the volume of the alarm:
Once the machine is set to manual mode and the time of day has been set using the “+” and “-” keys the
point in the middle of the display will stop flashing, now pressing the “-” key you will change the
volume.
Press and hold the “-” to hear the alarm level, each additional press will reduce the volume. This will
cycle from High . Medium . Low.
Press button 2 digits -0:00 are displayed.
Press button 5 or 6 to set the desired cooking time.
12:00 and AUTO +
light up a few seconds after buttons release.
• Set the oven by turning the Oven thermostat knob to the desired
temperature, the oven will immediately come into operation.
The acoustic signal will start to indicate elapsing of cooking time and that the
oven has switched off.
• Set the oven by turning the Selector knob to "0", then press button 4 to
silence the acoustic signal.
• Press button 2 to check or to change the remaining cooking time.
• Press button 3 to display the remaining cooking time when desired.
Press button 2 digits -0:00 are displayed.
Press button 5 or 6 to set the desired cooking time.
Actual time of the day and AUTO +
light up a few seconds after buttons
release.
• Press button 3 and consequently press button 5 or 6 to set the desired
cooking time. The symbol
will turn off and reappear when oven goes into
automatic operation at the start of the previously programmed duration.
• Set the oven by turning the Oven thermostat knob to the desired
temperature and choose the desidered function by turning Selector knob.
The acoustic signal will start to indicate elapsing of cooking time and that the
oven has switched off.
• Set the oven by turning the Selector knob to "0", then press button 4 to
silence the acoustic signal.
Advertisement
