Log Information > Battery Test Log
Battery Test Log
To record the UPS Self-Test and it shows in graphic. UPS Self-Test option is available
under System Information > Remote Control.
Management > Netility Web
This to display all the NetAgentA within network with its serial number; Mac Address;
Hardware/Firmware version and its IP address. Double click on the highlighted unit to
open the webpage of such device.
If the NetAgentA is access by WAN IP , Netility Web would also be able to list out all the
other available NetAgentA under same LAN as the NetAgentA that has WAN IP. (HTTP
port 81 must be enabled on the NetAgentA with WAN IP and domain to be as
http://xxx.xxx.xx:81 ( xxx.xx is the WAN IP or domain name)
Need help?
Do you have a question about the NetAgentA and is the answer not in the manual?