IPv6
All NetAgentA series supports IPv6. IP address can be obtain from the drop down list with
option of ( Automatic/Stateless DHCPV6/DHCPV6/Manual )
Once click on Apply, NetAgentA will reboot
Ethernet
Connection Type
This section is to set communication speed between NetAgentA and Network.
Once click on Apply, NetAgentA will reboot
Stop UPS communication when Ethernet disconnected
This section is to set if to stop UPS communication when NetAgentA disconnects with
Ethernet
Modbus on TCP Device ID:
Enter device ID to read/write data when using Modbus on TCP communication with
Megatec protocol and Modbus Register Table
Need help?
Do you have a question about the NetAgentA and is the answer not in the manual?