Configuration > NetFeeler
NetFeeler is the external optional environmental sensor. It is to detects temperature,
humidity and water. NetFeeler has RF receiver built-in to work with extension sensors
such as smoke, security sensor.
NetFeeler
NetFeeler
Humidity/Temperature Critical value:
To set the lowest and highest critical values for temperature and humidity. NetFeeler will
send a warning message when it detects temperature or humidity values below and above
these settings.
Security Label
NetFeeler may connect up to 7 security sensors that communicate via RF. This section is
to set the location or name of each sensor.
Configuration > System
This page is to set NetAgentA's system time, language and configuration.
Date/Time
NetAgentA to synchronize with external or internal Time Server for correct date and time.
System Time
System Time(yyyy/mm/dd hh:mmm:ss)
To display the current system time/date of NetAgentA. Or click on Adjust Now to adjust to
the correct time/date automatically
Time Between Automatic Updates:
To set an interval for time synchronization.
:
Time Server
Time server can be select from the drop down list , or add other time server manually.
Time Zone(Relative to GMT)
To select its GMT time zone
Using Daylight Saving Time
Select whether to use the daylight saving time system to adjust the clock for 1 hour in
advanced
:
:
:
Need help?
Do you have a question about the NetAgentA and is the answer not in the manual?