General
MIB System
System Name
This section is to give a name to the NetAgentA.
System Contact
This section is to give a name to the administrator.
System Location
This section is to set NetAgentA location.
SNMP UDP Port
:
NetAgentA SNMP Port
The port that NetAgnetA receive and send SNMP command. (Default is 161)
Trap Receive Port:
The port to receive trap. (Default is 162)
SNMPv3 Engine ID
SNMPv3 Engine ID Format Type:
When using SNMPv3, NetAgentA requires to have its Engine ID for identification to
generates authentication and encryption key . Format type can be select from the drop
down list with option of MAC Address / IPv4 / IPv6 / Manual
Once click on Apply, NetAgentA will reboot
SNMPv3 Engine ID Text:
SNMPv3 Engine ID content
Need help?
Do you have a question about the NetAgentA and is the answer not in the manual?