Configuration > Email - Mega System Technologies NetAgentA User Manual

Device Connected

This section is to set the usage power and connection status of other devices which
connects to the same UPS as NetAgentA uses.

Configuration > Email
To send email notification when event occurs or data log. Encryption supports are
SSL/TLS/STARTTLS
Email Setting

Email Server:
Enter the address of email server
Email Port:
Email Port that use for sending email
Enable SSL on Email Transmission:
Select SSL type for email transmission
Sender's Email Address：
To enter the email address that for sending email
Email Server Requires Authentication
If such email server requires authentication or not
Account name：
If authentication is required, enter its account name
Password：
If authentication is required, enter its password
：
Sending Test Mail
Enter email address to check all configuration is correct or not to receiving mail
：