Status Led Indicator - James Loudspeaker M102 Owner's Manual

Status LED Indicator

The infrared receiver and the status LED are located on the front behind the grille. During operation, the
LED color will change according to the input selection. The status LED confirms triggering of a command
by the remote control by flashing briefly.
Note: The sound will not be generated from the speakers for approximately 5 seconds after the unit is
powered on.
When all inputs except Bluetooth are selected, the LED will turn off after 5 seconds of inactivity with the
remote.
In Bluetooth mode, the blue LED will always stay on. In pairing mode, the LED will flash until paired. When
the volume is adjusted, the LED will flash.
8
LED Status
Green
White
Purple
Yellow
Red
Flashing Red
Any LED color flashing
Blue
Flashing Blue Slowly
Function
AUX/Analog In selected
Coax/Digital In selected
HDMI-ARC selected
Optical/TosLink in selected
Amp in standby mode (off)
Amp startup (5 secs)
Amplifier is muted
Bluetooth selected and paired
Bluetooth waiting to pair