Power On/Off; Line Power Connection; Bluetooth Antenna - James Loudspeaker M102 Owner's Manual

1.Connecting the signal cables

POWER ON/OFF

1
Do not turn on until all connections are completed.

LINE POWER CONNECTION

2
The amplifier has a universal AC power supply and will work on AC voltages
between 100 and 240 volts automatically. Use only the supplied 90-degree elbow
AC cable.
AUX/ANALOG IN input (RCA JACKS)
3
Source device with analog line output, for example CD player, DVD player
network player, preamplifier, smartphone, tablet, PCs/laptops via 3.5 mm
headphone jack.
SUBWOOFER PRE-OUT (RCA JACK)
4
Low level signal output for external subwoofer via RCA cable. (Optional 2.4Ghz
Wireless Transmitter /Receiver is highly recommended.)
OPTICAL/DIGITAL IN (TosLink connector)
5
Source device with digital output, for example CD player, DVD player, network
player, satellite receiver, television, PCs/laptops (PCM up to 24/192 kHz).
HDMI-ARC input
6
To connect the Audio Return Channel of a compatible TV with an HDMI cable.
(HDMI cable not included.)
COAX/DIGITAL IN input (RCA JACK)
7
Source device with digital output, for example CD player, DVD player, network
player, satellite receiver, television, PCs/laptops (PCM up to 24/192 kHz).

BLUETOOTH ANTENNA

8
Source device with Bluetooth link such as network player, PCs/laptops,
preamplifier, television, smartphone or tablet
2. Connection to the power grid
First connect the power cable to the mains connector and then to the mains supply.
7