Sony HBD-E190 Service Manual page 63

Pin No. Pin Name
D23 NO_USE
D24 WIFI_PCONT
D25 TDI
E1 INF
E2 INE
E3 AVDD33_1
E4 HAVC
E5 VDAC0
E6 RSTI
E7 NO_USE
E8 NO_USE
E9 AVSS33_PLL
E10 NO_USE
E11 AVSS33_DAC
E12 NO_USE
E13 NO_USE
E14 AVSS33_HDMI
E15 NO_USE
E16 AVDD33_VDAC
E17 NO_USE
OCPI
E18
GPIO1
E19 NO_USE
E20 UATXD
E21 NO_USE
E22 DVCC33_IO_STB
E23 SPDATA
E24 SYS_REQ
E25 TCK
F1 FEMPXOUT3
F2 FEMPXOUT2
F3 NO_USE
F4 FEMPXOUT1
F5 AUX1
F6 AGND33_1
F7 AGND33_3
F8 NO_USE
F9 AVDD33_COM
F10 NO_USE
F11 AVSS12_REC
F12 NO_USE
F13 AVSS33_LD
F14 AVSS33_VDAC_R
F15 NO_USE
F16 NO_USE
F17 AVDD33_LD0
F18 NO_USE
F19 UARXD
I/O
- Not used
I/O GPIO
I/O JTAG ICE data in
I Input of Main Beam Signal (F)
I Input of Main Beam Signal (E)
- 3.3 V Power Pin
O Decoupling Pin for Reference Voltage of Main and Sub Beams
O Output of General DAC
I Front-End Power on reset
- Not used
- Not used
- PLL /BG analog ground
- Not used
- Analog Ground
- Not used
- Not used
- 3.3 V Analog Power
- Not used
- 3.3 V Analog Power
- Not used
I/O GPIO
- Not used
Reserved for debug-only Uart pins.
I/O (1) 1st RS232 TX
(2) T8032 RS232 TX
- Not used
- 3.3 V digital IO power for Stand-By Module
I/O SPDIF input data
I/O GPIO
I/O JTAG ICE clock
Multiplexer Output 3 for Signal Monitoring. The pin is not allowed to pull-up in circuit layout.
O
Alternative function: Internal monitored signal output / General output.
Multiplexer Output 2 for Signal Monitoring. The pin is not allowed to pull-up in circuit layout.
O
Alternative function: Internal monitored signal output / General output.
- Not used
Multiplexer Output 1 for Signal Monitoring. The pin is not allowed to pull-up in circuit layout.
O
Alternative function: Internal monitored signal output / General output.
Auxiliary Input
I/O
Alternative function: Signal Monitoring
- Analog Ground
- Analog Ground
- Not used
- PLL / BG 3.3 V analog power
- Not used
- ADC analog ground
- Not used
- Line driver analog ground
- Analog Ground
- Not used
- Not used
- 3.3 V power for standby
- Not used
Reserved for debug-only Uart pins.
I/O (1) 1st RS232 RX
(2) T8032 RS232 RX
HBD-E190/E290/E490/E690
Description
63