Sony HBD-E190 Service Manual page 24

HBD-E190/E290/E490/E690
6. Diag (Audio Input Test)
This screen performs audio input test.
Screen 1: Select Audio Input Test Category
Operation:
[<]/[,] Selects the category
[m]/[ ] Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device
After "Audio Input Test" selects in Screen 1, the device to test is
chosen.
Operation:
[M]/[m] Selects Device
[ ] Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
• Device Test : Device List
Digital Input1 : CXD90008 is inputted from ARC
Digital Input2 : CXD90008 is inputted from Optical
Analog Input : CXD90008 is inputted from AUDIO
• Audio Input Test
CXD90008 is inputted from DIR/analog and outputs LineOut
(8ch) L and R.
Check tone sound by speaker connected with LineOut (8ch) L and
R.
(Input; LPCM 48kHz 2ch)
Diag
Audio Input Test
Category:
Diag
Category: Audio Input Test
Device:
Digital Input 1
Digital Input 2
Analog Input
[ENT] Start Input Sound
(Screen 1)
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
(Screen 2)
[ ]
Diag
Category: Audio Input Test
Device:
Digital Input 1
Digital Input 2
Analog Input
[ENT] Stop Input Sound
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
24
7. Diag (Wireless LAN Test)
This screen performs wireless LAN test.
Note: Not used for the servicing.
8. Diag (MIC Input Test)
This screen performs MIC input test.
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
This screen performs HDMI input test.
Note: Not used for the servicing.
10. Diag (Transcoder Test)
Note: Not used for the servicing.
11. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[ ]
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[
<
[
,
[RETURN] Returns to the screen (Screen 1) that selects the log
[RED]
•
Error Log:
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note: Please do not press the [RED] button immediately after USB mem-
Error Log:
[ ]
(Screen 1)
Moves to the Error Log output screen
] Returns to the previous page
] Moves to the next page
type
Writes the log contents to an USB memory device
Viewing the log display
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[Index number] [Date] [Time] [Error code]
ory is inserted.
Please do not pull out USB memory immediately after the [RED]
button was pressed.
When "getErrLogFile.trm fi le" exists in the USB memory de-
vice, errlog.log fi le is output.
Select Log
[1] Error Log
Error Log
02]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
HELP : [DOWN][ENT][(NUM)]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[182] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
HELP : Press [RED] key to store log to Udisc.
(Screen 2)
<Page 1/20>