Special Modes Setting - Panasonic DMR-EH54DEG Service Manual

DMR-EH54DEG
Error Code Diagnosis contents
HARD ERR Drive error
SELF CHECK Restoration operation
Full Program 32 programs are already
set.
UN- Unformatted disc error
FORMAT
PLEASE WAIT Unit is in termination
process
HDD NG Power-ON
Standby Setting of HDD
cannot be done

10.2. SPECIAL MODES SETTING

Mode name
TEST Mode
Rating password
Service Mode
Forced disc eject
Child lock/unlock
The drive detected a hard error.
Since the power cord fell out during a
power failure or operation, it is under
restoration operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there is the possibility that
defective Digital P.C.B. / RAM drive.
32 programs are already set.
You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment.
If you will use this disc, format is
necessary.
But, all program recorded on this disc
will be deleted.
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON,
it is displayed in restoration operation for
AC off.
Power-ON
Standby Setting of HDD is judged at starting
of deck.
In case of HDD that has not being set, deck
try to set. But if setting cannot be done,
"HDD NG" is displayed.
Item
Description
*All the main unit´s parameters (include
tuner) are initialized.
The audiovisual level setting password is
initialized to "Level 8".
Setting every kind of modes for servicing.
*Details are described in
"Service Mode".
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is
ON, execute " Forced disc eject " after
releasing Timer REC or EXT-LINK.
*This command is not effective during
"Child lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
If this command was executed while
TIMER REC is being set, TIMER REC
setting will turn to OFF.
Set or release "Child Lock".
Description
"DVD drive error."
No display
No display
Format:
This disc is not
formatted properly.
Format the disc in
DISK
MANAGEMENT?
No display
No display
FL display
The display before execution
leaves.
14
Monitor Display Automatic FL display
Display for 5 seconds.
Key operation
Press [STOP], [CH UP] and
[OPEN/CLOSE] keys
simultaneously for five seconds
when power is off.
Open the tray, and press [REC]
and [PLAY] simultaneously for 5
seconds.
NOTE:
Drive should be selected to DVD.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
When the power is off, press
[STOP] and [CH UP] keys
simultaneously for 5 seconds.
Press [ENTER] and [RETURN] by
remote controller simultaneously
until [X-HOLD] is displayed.
Front Key