Table of Contents
Advertisement
DMR-EH54DEG
9 (DVD) SERVICE EXPLORER
Confirm "RAM-Drive Last Error" in Service Mode
Execute Service Mode
1. Press [REC], [CH UP] and [OPEN/CLOSE] simultaneously for 5 seconds when P-off.
FL Display:
*After finishing display "(7). Factor of Drive Error occurring", press [0] [2] ~[1] [9] keys of the Remote Controller so that
19 memories can be displayed as maximum.
2. Press [4] [2] keys of remote controller.
Example of FL Display:
(1) Error Number is displayed for 5 seconds.
(2) Time when the error has occurred is displayed for 5 seconds.
(3) Last Drive Error (1/2) is displayed for 5 seconds.
When above error codes are displayed, confirm operation with Panasonic RAM or DVD-R disc.
* If the operation is OK, judge the error is due to media.
* If the operation is NG and symptom as BLOCK NOISES and so on that are particular symptom of Digital
appears, judge the error is due to RAM-Drive or Digital P.C.B. .
(4) Last Drive Error (2/2) is displayed for 5 seconds.
(5) Error occurring Disc type is displayed for 5 seconds.
(6) Disc Maker´s ID is displayed for 5 seconds.
10
Advertisement
Table of Contents
