Special Modes Setting - Panasonic DMR-EH50P Service Manual

Error Code Diagnosis contents
UNFORM Unformatted disc error
AT
PLEASE Unit is in termination process
WAIT

11.2. Special Modes Setting

Mode name
TEST Mode *All the main unit´s parameters (include tuner)
are initialized.
Rating password The audiovisual level setting password is
initialized to "Level 8".
Service Mode Setting every kind of modes for servicing.
*Details are described in "11.3. Service
Mode".
Forced disc eject Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Forced power- off When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute "Forced Power- off" after releasing
Timer REC or EXT-LINK.
Aging Perform sequence of modes as * Aging
Description shown below continually.
Description
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
Item
Description
Monitor Display
No display
FL display
The display before execution
leaves.
Display in P-off mode.
Display following the then mode.
17
DMR-EH50 P / DMR-EH50 PC
Automatic FL display
Key operation
Front Key
Press [STOP], [CH UP]
[OPEN/CLOSE] keys
simultaneously for five seconds
when power is off.
Open the tray, and press [REC] and
[PLAY] simultaneously for
seconds.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
When the power is off, press
[STOP] and [CH UP] keys
simultaneously for 5 seconds.
Press [Power] key over than 10
seconds.
When the power is ON, press
[STOP], [POWER]
[OPEN/CLOSE] simultaneously for
over 5 seconds and less than 10
seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit's parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-
execute this command.
*When releasing Aging mode, press
[POWER] key.
and
5
and