Table of Contents
Advertisement
Trouble shooting
en
3Trouble shooting
I f a fault occurs, there is often a simple explanation.
T r o u b l e s h o o t i n g
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Fault table
If a dish does not turn out as well as you had hoped,
refer to the section
Tested for you in our cooking studio
contains useful tips and information on cooking, baking,
roasting and frying.
Fault
Possible cause
The oven does
Faulty fuse.
not work.
Power failure.
The oven does
Dust on the con-
not heat up.
tacts.
The timer is set to
position 0.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs must only be
carried out by after-sales technicians that have been
trained by us.
:
Warning – Risk of injury!
Incorrect repairs are dangerous. Do not attempt to
repair the appliance yourself. Repairs must only be
carried out by one of our trained after-sales engineers. If
the appliance is defective, call the after-sales service.
22
. It
Remedy/information
Look in the household fuse box
and check that the fuse is in
working order.
Check whether the kitchen light
or other kitchen appliances are
working.
Turn the switch to the right and
left a couple of times.
Turn the timer to the OFF posi-
tion.
Replacing the bulb in the top of the cooking
compartment
If the cooking compartment light bulb fails, it must be
replaced. Heat-resistant, 25 watt, 230 V halogen bulbs
are available from the after-sales service or specialist
retailers.
When handling the halogen bulb, use a dry cloth. This
will increase the service life of the bulb. Only use these
bulbs.
:
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Place a tea towel in the cold cooking compartment
1.
to prevent damage.
Turn the glass cover anti-clockwise to remove it
2.
(figure
).
!
Pull out the bulb – do not turn it (figure
3.
Insert the new bulb, making sure that the pins are in
the correct position. Push the bulb in firmly.
Screw the glass cover back on.
4.
Depending on the appliance model, the glass cover
may have a sealing ring. If the glass cover has a
sealing ring, put it back in place before screwing the
cover back on.
Remove the tea towel and switch on the circuit
5.
breaker.
).
"
Advertisement
Table of Contents
