Advertisement
•
Connecting an External Audio Device
Use a 3.5 mm to RCA stereo audio cable (not included) or a 3.5 mm to 3.5 mm stereo audio cable (included) to connect the soundbar's
AUDIO IN socket to the AUDIO OUT/HEADPHONES sockets of the external device.
After the connection is completed,
1. Press
on the unit or remote control to switch on the unit.
2. Press SOURCE on the unit or remote control repeatedly to select AUDIO IN mode to play audio from your input device.
3.5 mm to RCA Stereo Audio Cable
(not included)
Set-top Box
Blu-ray Player / DVD
Satellite Receiver
Player / Recorder
• Ensure the colours on the cable plugs match with the colours on the input and output sockets.
• DO NOT connect the soundbar and TV by using the AUDIO IN socket.
•
Connecting to the Mains Supply
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is firmly inserted into the mains socket.
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.
• The mains cable are designed for this JVC soundbar only. DO NOT use the mains cable for other purposes.
Soundbar
Unwind the mains cable to its full length. Connect the end of
the mains cable to the AC~ socket at the rear of the soundbar
then connect the mains plug to the mains socket and then
connect the mains plug to the mains socket. Make sure the
mains plug is fully inserted into the mains socket.
Rear View of the Soundbar
3.5 mm to 3.5 mm stereo
audio cable (included)
Or
Game Console
Video Camera
MP3 Player or
Mobile Device
Rear View of the Soundbar
•
EQ and Bass/Treble Level Settings
Select Equaliser (EQ) Effect
Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote control to select the preset equaliser effects.
When CUSTOM (Default) is selected, the COAXIAL indicator will flash (Orange) once.
•
•
When MOVIE EQ is selected, the OPTICAL indicator will flash (White) once.
•
When MUSIC EQ is selected, the BT indicator will flash (Blue) once.
• While the unit is in COAXIAL, OPTICAL, or AUDIO IN mode, it will automatically switch into MOVIE EQ effect.
• While the unit is in Bluetooth mode, it will automatically switch into MUSIC EQ effect.
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Make sure that the EQ is set to CUSTOM mode.
2. Press BASS/TREBLE on the remote control. The AUX IN, BT, OPTICAL and COAXIAL indicators
will flash once.
3. Press VOL+/VOL– to adjust the bass/treble level.
4. After about 5 seconds, the AUX IN, BT, OPTICAL and COAXIAL indicators will flash once again to
indicate that the unit has exited BASS/TREBLE setup.
5. You may now press VOL+/VOL– to adjust volume.
• While adjusting the bass/treble level, the status indicator flashes quickly.
• While the BASS/TREBLE reaches its maximum or minimum level, the status will flash once if
you press VOL+/VOL– again.
The table below also shows the EQ mode supporting bass/treble adjustment.
EQ Mode
Adjusting Bass Level?
Custom
3
Movie
N/A
Music
N/A
To the mains
socket
Well done,
your new soundbar is now ready to use. You will find that there are many exciting features available. To get to know all
these features, please take some time to read the instruction manual provided with your soundbar.
Front view of the main unit
(while pressing BASS/TREBLE button)
AUX IN
Indicator
(Green)
Adjusting Treble Level?
3
N/A
N/A
For general information about this appliance and
handy hints and tips, please visit:
www.TeamKnowhow.com/discover or call
UK: 0344 561 1234
Ireland: 1 890 818 575
BT
OPTICAL
COAXIAL
Indicator
Indicator
Indicator
(Blue)
(White)
(Orange)
(QSG-TH-D227B-180329V4)
Advertisement
