Getting Started - HP t450 Quick Start Manual

Getting Started

Adapter charging mode
PC USB charging mode
Step 1 :
Load the Battery
• Slide the latch and open the battery cover.
• Insert the battery correspondingly with the
correct polarity marks (+ or -).
• Close the battery cover firmly so that it
locks into place.
Step 2 :
Charge the Li-ion Battery
• Charge the battery fully before first use.
• Under charging, the indicator will flash.
• It could take up to 5 hours to charge fully
with an adapter. Once complete, the
indicator will turn off automatically.
Note:
• A longer time is required via a PC USB.
Step 3 :
Insert the Memory Card
• Slide the latch and open the battery cover.
• Insert the SD card into the slot
until it locks properly.
• To remove the SD card, press inward to
release it and gently pull it out.
3