Installation; Hardware Installation - Vivotek IP7138 User Manual

Installation

In this manual, "User" refers to whoever has access to the Network Camera, and
"Administrator" refers to the person who can configure the Network Camera and grant
user access to the camera.

Hardware installation

Please verify that
your product package
contains all
accessories listed in
Upon powering up, the LED will become lighted first and then the device will go through
booting process. The LED will be steady orange for getting IP address. After getting IP
Address, the LED will blink green every second and the red-color is always on.
The Network Camera will first detect Ethernet. Operating in either network mode, the
LED will blink green-color as heartbeat to indicate alive.
the foregoing Package Contents.
user's application, an Ethernet cable may be needed.
The Ethernet cable should meet the specs of UTP
Category 5 and not exceed 100 meters in length.
Connect the power adapter jack to the Network
Camera before plugging in to the power socket. This will
reduce the risk of accidental electric shock.
the
- 7 -
Depending on the
www.vivotek.com