Whisk Set - Silvercrest SSMS 600 E2 Operation And Safety Notes

The speed regulator 2 can be turned
steplessly to regulate the speed . Turn the
beam of the speed regulator to the desired
adjustment:
Speed regulator 2
Speed scale 3
(Highest)
Connect the power plug 1 to a suitable
mains socket .
Button
4 Speed according to
Press
and
hold
button
TURBO 5 Highest speed
Turning off the product: Release the pressed
button ( 4 or 5 ) .
NOTES:
Let the product rest at least 2 minutes
between cycles (see Max. time in the
following tables) .
After 5 continuous operation cycles: Let the
product cool to the room temperature before
reusing it .
The speed can also be changed while the
product is operating .
(Lowest)
Setting
speed regulator 2
setting
˜ Hand blender
(ill . B)
NOTES:
With this hand blender 14 you can prepare
dips, sauces, soups or baby food . We suggest
using the hand blender for a maximum
of 1 minute at a time and then letting the
product cool down .
With the liquid container 10 you can measure
volumes of fluids up to 700 ml . For food
processing, fill it to a maximum of 300 ml,
otherwise fluids could overflow from the liquid
container .
Put the hand blender 14 on the drive unit 15 .
Attach the lid 11 at the bottom of the liquid
container 10 as anti-slippery coating .
Give the food into the liquid container 10 .
Connect the power plug 1 to a suitable
mains socket .
Puréeing and mixing food: Press and hold
4 . Use TURBO 5 , if needed .
After use: Wait until the hand blender 14
has come to a complete halt . Disconnect the
power plug 1 from the mains socket .
If you wish to store the food in the liquid
container 10: Close the liquid container with
the lid 11 .
˜ Whisk set
(ill . C)
NOTES:
The volume of some ingredients can expand
while processing . We suggest to process
smaller ingredients at once in order to avoid
food spilling over .
GB 11