Advertisement
Cables Setup
Now attach one end of 14.5ft blue cable to blue hook on back side of jib (section 3) and the other end of
blue cable to blue hook on front section of jib (section 1). Similarly attach the second blue cable and
align both the blue cables to the side of support rod.
Now attach one end of 14.3ft red cable to red hook on back side of jib (section 3) and align the red cable
to the cable guide from top. Then, attach the other end of red cable to red hook on front section of jib
(section 1).
Adjustment Wire Tensioner
The wires have the screw-in wire adjustment system in order to adjust the wire tension to level the jib.
The jib arm can be locked (tilting) with the help of this knob. Then Insert the weight rod & weights (not
supplied) to both ends and secure with the help of closers.
4
Advertisement
