Setup Instructions - PROAIM Alphabet 21ft Crane Assembly Manual

SETUP INSTRUCTIONS

 Install the Hub (Section 2 of Jib) into bowl of your 100mm tripod stand and tighten the hub with center
locking knob.
Jib Sections Setup
Connecting Section 2 with 3:

Loosen the provided knob at the end of section 2 to slide the bars of section 3 into the end of section 2.
Then tighten both the sections together using the provided knobs.
Cable Guide & Support Rod Setup
For Attaching Section 2a with 2, 2b with 2a, 2c with 2b & 1 with 2c:
 Attach cable guide to cable guide clamp on 2nd section properly. Loosen the knob, ahead of cable guide
clamp in order to attach cable guide support rod to it. Retighten the knob to secure properly.
3
Knobs