Quick View Setting - Vivitar ViviCam 3730 Instruction Manual

Quick View Setting

You can view the picture immediately on the LCD screen right after it is taken.
You can perform Quick View Setting in any Mode dial.
(
Note:
After the above 1 minute power saving, if there is no more operation
in another 1 minute, this camera will automatically power off. You have
to push the POWER bottom in order to turn on the camera again.
3 minutes: This camera will automatically turn off monitor screen if there
is no operation after three minutes (the LED is on in Green.)
Performing any button will have the monitor screen to turn
back on.
Note:
After the above 3 minute power saving, if there is no more operation
in another 1 minute, this camera will automatically power off. You have
to push the Power bottom in order to turn on the camera again.
Off: This camera will not perform the power saving function.
1. Press MENU button.
2. Then press RIGHT button (
3. Press DOWN button (
)
)to QUICK VIEW.
13
Preparing to Take Pictures
) to SETUP MENU.