Reference
Troubleshooting
Problem
Power does not turn on.
The camera does not shoot.
Message
Door Open
Battery Empty
Busy (into thumbnail,
delete all...)
Formatting
No Card
Copy to Card
Copying
Copy Error
Not Enough Memory
in Card
Protect (When do "delete
single" to a protected file)
Protect All (When do "delete
all" to all protected file)
No Image (delete single,
delete all into, delete,
protect, slide show, print
order) when acting above
actions, if no image
desplayed, LED will light.
- Batteries are loading in wrong
dirction.
- Batteries are dead.
- The battery cover is open.
- The model dial is set to
Playback mode.
- The flash is charging.
- Memory is full.
- The SD card is nor formatted
correctly.
UNIT: 100ms
LED
ON
2
Red
2
Red
Green
3
Green
3
Red
2
Green
3
Red
2
Red
2
Red
2
Red
2
2
Red
Cause
- Reload batteries in the correct
direction.
- Replace the new batteries.
- Make sure the battery cover is
closed security.
- Turn the mode dial to Auto
mode, Manual mode or Video
mode.
- Wait until the flash charges.
- Insert a new SD card.
- Delete images you no longer
need.
- Format the card correctly.
- The card may be defective.
Please change a new card.
54
OFF
2
3
3
3
3
3
3
3
3
3
3
Action