Canon PRO-300 Series Online Manual page 538

Hide thumbs Also See for PRO-300 Series:

Table of Contents

• If paper becomes jammed during printing and you need to turn off the printer to remove it,

press the printer's Stop button to stop the printing before you turn off the printer.

• If the paper tears and you cannot remove the jammed paper from the paper output slot or the

manual feed tray, remove the paper from inside the printer.

Paper Is Jammed inside Printer

3. Return manual feed tray to original position.

4. Reload paper and press the printer's OK button.

The printer resumes printing. Reprint the page you were printing if it was not printed properly due to

the paper jam.

If you turned off the printer in step 2, the print data that was sent to the printer is erased. Redo the

• When reloading the paper, make sure you are using suitable paper and loading it correctly.

Also, make sure that the paper in the top feed is not resting against a wall or any other

obstacle. If the paper is touching a wall, this may prevent the paper from being fed into the

printer correctly.

If the measures above do not solve the problem, contact your nearest Canon service center to request