Table of Contents
Advertisement
User Manual of WBS-512AC
Multiple SSIDs with VLAN Tagging
The WBS-512AC supports WPA/WPA2, and the 802.1X RADIUS authentication to secure the wireless
connection. Besides, the supported IEEE 802.1Q VLAN allows multiple VLAN tags to be mapped to multiple
SSIDs to distinguish the wireless access. This makes it possible for the WBS-512ACN to work with managed
Ethernet switches to have VLANs assigned to a different access level and authority.
3 Simple Steps to Set Up PtP Connection
Without needing to enter the Web interface for configuration, the WBS-512AC has the DIP switch for setting to
master (AP mode) and to slave (repeater mode). User only needs three simple steps to establish the PtP
connection without any difficulty. By just switching the button to "Master" on the master AP, and pressing the reset
button, the PtP connection can be established in 2 minutes as the connection steps are shown below.
-3-
Advertisement
Table of Contents
