Table of Contents
Advertisement
3.4.10
Advanced: Network Stack Configuration
Options Summary
Network Stack
Set DIO as Input or Output
Ipv4 PXE Support
Enable/Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support will not be
available
Ipv4 HTTP Support
Enable/Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot support will not be
available
PXE boot wait time
Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric
keys to set the value.
Chapter 3 – AMI BIOS Setup
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
0
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
61
Advertisement
Table of Contents
