Table of Contents
Advertisement
3.2
AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations, which are stored in the battery-backed CMOS RAM and BIOS
NVRAM so the information is retained when the power is turned off.
To enter BIOS Setup, press <Del> immediately while your computer is powering up.
The function for each interface can be found below.
Main – Date and time can be set here. Press <Tab> to switch between date elements
Advanced – Enable/ Disable boot option for legacy network devices
Security – The setup administrator password can be set here
Boot – Enable/ Disable quiet Boot Option
Save & Exit – Save your changes and exit the program
Platform Configuration – Displays and provides option to change the Platform System
Settings
Socket Configuration
Displays and provides option to change the Socket Settings
-
Chapter 3 – AMI BIOS Setup
34
Advertisement
Table of Contents
