Philips Sonicare FlexCare 900 Series User Manual page 15

Press and hold the power on/off and mode button for 5 seconds.
You hear 2 beeps to indicate that the Easy-start feature has been
activated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Note: Easy-start feature is only active in Clean Mode.
Smartimer
The Smartimer indicates that your brushing cycle is complete by
automatically turning off the toothbrush at the end of the brushing
cycle.
Dental professionals recommend brushing no less than 2 minutes
twice a day.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and
pause to remind you to brush the 4 sections of your mouth.
Depending on the brushing mode you have selected, the
Quadpacer beeps at different intervals during the brushing cycle.
See 'Brushing modes' in chapter 'Using the appliance'.
The Quadpacer feature on this model has been activated. To
deactivate or reactivate the Quadpacer feature:
1 Place the handle with a brush head attached on the plugged-in
charger.
2 Press and hold the mode button until:
a You hear 1 beep to indicate that the Quadpacer has been
deactivated.
b You hear 2 beeps to indicate that the Quadpacer has been
activated.
Cord wrap on deluxe charger (specific types only)
If your type includes the deluxe charger cover and base, the travel
charger is pre-installed inside the cover. If you want to shorten the
mains cord, you can store excess cord in the cord wrap feature built
into the charger base.
15
English