Philips Sonicare FlexCare 900 Series User Manual page 11

8 Mode button
9 Battery level indicator
10 UV sanitiser base with integrated charger and cord wrap (specific
types only)
- Not shown: UV light bulb
- Not shown: Sanitizer drip tray
- Not shown: Protective screen for UV light bulb
11 Mains cord with plug
12 Charger cover with brush head holders (select models)
13 Travel charger
- Not shown: Travel case
The content of the box may vary based on the model purchased.
Preparing for use
Changing the colour code ring (for select models)
Sonicare brush heads come with interchangeable colour code rings to
identify your brush head.
To change the colour code ring:
1 Pull the colour code ring from the bottom of the brush head.
2 Install a new ring by slipping one edge of the new ring over the
bottom of the brush head.
Attaching the brush head
1 Align the brush head so the bristles point in the same direction as
the front of the handle. (Fig. 2)
2 Firmly press the brush head down onto the metal shaft until it
stops.
Note: There is a small gap between the brush head and the
handle.
Charging the appliance
1 Put the plug of the charger or sanitizer in a wall socket.
2 Place the handle on the charger or sanitiser.
11
English