3.8. RS485
3.8.1. RS485 PARAMETER
Press Apply to save current
data to configuration
Speed: Select baud rate for RS485 transfer
Data Bits: Setting data bits (5, 6, 7, 8)
Parity: Select paruty (None, Even, Odd)
Stop bits: Stop bits selection (1 or 2)
Config: Select the config willing to save.
1. Filling all the needed RS485 parameters.
2. Fill data (0~255) into Content block, and separate it with comma.
3. Press Apply to save the current status and content data into the config or press Send to
send current content directly.
4. If the Configuration is no longer needed, user can press Clear to remove saved
configuration.
JMC Systems Engineering AB
www.jmc.se
info@jmc.se +46 8 828270
23
23/24