Phone Jack Form you Audio Device plug into this port Component/CVBS/S-Video From your YPbPr/CVBS/S-Video Device plug Output Port into this port From your DVI-D/DIV-A Device plug into this DVI-D/DVI-A Output Port port JMC Systems Engineering AB www.jmc.se info@jmc.se +46-8-82 82 70...
Side Panel Component Function USB Port Upgrade firmware/Control Box From PC Button/LED Indicate 1. Firmware Mode: Hold on the 3 and 2 button, the display is showed firmware version on display JMC Systems Engineering AB www.jmc.se info@jmc.se +46-8-82 82 70...
COLOR BAR HATCH CROSS WHITE Installation SDI2Multi installation consists of the following: 1. Disconnect +12DC adaptor to converter. 2. Connect Video Source (SDI) to the SDI Connector. 3. Connect Equipment to the output’s connector JMC Systems Engineering AB www.jmc.se info@jmc.se...
4. Connect the +12DC adaptor to the converter. Package Contents The SDI2Multi package contains the following items: User Manual x 1 +12 DC Adapter x 1 SDI2MultiConverter x 1 Specifications DESCRIPTION SDI Format SD-SDI, HD-SDI & 3G-SDI SDI Transition Rate 2.970Gb/s, 10485Gb/s and 270Mb/s...
Open Upload Firmware Program tools.exe and connect box to PC by USB Cable. Step2. Plug and un-plug “DC adapter” to power on/off the converter box (the connection check status will be changed to “Connect”) JMC Systems Engineering AB www.jmc.se info@jmc.se +46-8-82 82 70...
Page 12
“Connected”) and Please click the Open File button to select the firmware bin file. Step4. Please click “Start’ Button to proceed with new firmware programming. The PASS message will appear when the procedures finished. Step5. Close Upload Firmware Program tools JMC Systems Engineering AB www.jmc.se info@jmc.se +46-8-82 82 70...
Update List Data Version Command 2012.11.05 V1.0 File established 2013.10.08 V1.1 1. Rename to SDI2Multi 2. Add Pattern Generator Function JMC Systems Engineering AB www.jmc.se info@jmc.se +46-8-82 82 70...