Using The Paraglider; Delivery; Basic Settings; Adjusting The Brake Lines - Advance acoustic EPSILON 8 Series User Manual

Using the paraglider

Delivery

Before delivery every ADVANCE paraglider has to be flown by the deal-
er and checked for correct settings and trim. When this has been done
the dealer enters the date of the first flight on the label attached to a
centre rib. This entry, together with a completed warranty card, will
ensure that defects in the product attributable to manufacturing faults
are covered by the ADVANCE warranty. See 'Warranty' in the section
«Service».
Within 10 days of purchasing your glider we ask you to fill in the regis-
tration form on the internet, to be found under "Warranty".
The EPSILON 8 comes with an COMFORTPACK rucksack, an inner
bag, a compression strap, a repair kit, carbon speed bar with lines, a
mini windsock in the canopy colours and a 'Getting Started' booklet.

Basic settings

The length of the brake lines is set at the factory so that the trailing
edge is not braked ( is crease-free ) when brakes are fully released
in fully accelerated flight. This setting should be kept as a matter of
principle.

Adjusting the brake lines

The brake handle positions have been set at the factory to allow free
brake line travel of approximately 8 cm between the brakes free posi-
tion and the point where brake application first affects the wing trail-
ing edge in unaccelerated flight. This free run makes sure, among oth-
er things, that the trailing edge remains unbraked with brakes released,
both at takeoff and during accelerated flight, thus implying that the
brake line length should not be altered.
We recommend the bowline knot for fastening the brake handles. See
illustration at the end of the manual.
10