Saeco DA 7P Plus Instructions For Installation And Use Manual page 13

Vending machine for hot beverages
Table of Contents

Advertisement

COINS ACCEPTED
ESPRESSO
LONG
ESPRESSO
ESPRESSO WITH
A DASH OF MILK
CAPPUCCINO
Fig. 18
4th BUTTON (ENTER button) : It is used to display the values contained in the various menus, which can then be modified using the
UP and DOWN buttons. The same button is used to enter any changes. By pressing this button from the initial menu 000, it is possible
to exit the programming mode and the machine will be ready to dispense beverages.
Programming mode
To enter the programming menu, press button 26. The display reads 000. Beverage dispensing or any other machine function is no
longer possible. The machine will automatically exit the programming mode if it has been idle for about 1 minute and return to beverage
dispensing mode.
Programming menu configuration
Values can be programmed in the following menus:
000 Power on/power off menu. It is accessed by pressing button 26 ; access to the other menus is possible using the UP button. To
quit this menu, press the ENTER button.
001 Price 1 (low price) menu. By pressing the ENTER button from this menu, the price 1 value is shown and can be modified.
002 Price 2 (high price) menu. By pressing the ENTER button from this menu, the price 2 value is shown and can be modified.
A-1 Channel 1 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
1 is shown and can be modified.
A-2 Channel 2 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
2 is shown and can be modified.
A-3 Channel 3 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
3 is shown and can be modified.
A-4 Channel 4 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
4 is shown and can be modified.
A-5 Channel 5 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
5 is shown and can be modified.
A-6 Channel 6 coin value menu. By pressing the ENTER button from this menu, the value of the coin accepted by the coiner channel
6 is shown and can be modified.
U Multi-product dispensing menu. This menu activates the standard or multi-product dispensing mode. By pressing the ENTER button,
the display reads 0, showing the standard dispensing mode. By pressing the UP button, the display reads 1, activating the multi-product
dispensing mode.
With G13 coiners, the DA7P PLUS machine can be activated both into the multi-product dispensing and standard
dispensing mode. With G26 coiners, the DA7P PLUS can be activated into multi-product dispensing mode only. When
installing SaecoCard, the equipment automatically sets to the multi-product dispensing.
Exit programming
Programming can be exited by pressing the ENTER button from the 000 menu. To enter the 000 menu, use either the DOWN button
to scroll down menu by menu, or the CLEAR button to have immediate access from any other menu to the 000 menu.
Selling price programming
Program price 2 first and then price 1.
From the 000 menu, press the UP button twice.The display will show 002.
Press the ENTER button to display and be able to modify the price 2 value.
By pressing the UP button, the value will be changed from 000 to the minimum coin value pre-set by the nation key corresponding
to the country of usage.
After entering the required value, press ENTER to confirm. The entered value is stored in the system memory and the display
automatically shows 002 again.
Button functions
1st BUTTON (UP button) : It is used to scroll up the menus and to increase the values
UP button
displayed during programming.
DOWN button
2nd BUTTON (DOWN button) : It is used to scroll down the menus and to reduce the
values displayed during programming.
CLEAR button
ENTER button
3nd BUTTON (CLEAR button) : It is used to return to main programming menu 000. If
pressed during the programming mode, it reduces the value displayed to its minimum.
English
25

Advertisement

Table of Contents
loading

Table of Contents