Charge Mode; Modifying The Charge Settings - Team Orion ProSpec Advantage Instruction Manual

Charge Mode

Select the memory profile referring to the battery type you wish to charge. If no compatible settings
are available, you will have to make your own settings.
To make your own settings, press the ENTER key to enter setup mode. Select the memory profile
to use, the battery type, the number of cells, the cell's capacity, the charge rate (1C by default) and
depending on the battery type, the delta-peak value or if you wish to use balancing or not (only for
LiPo/LiFe with balancing connector).
Once the proper settings are made, press the ENTER key until the battery check and then the charge
screen appear. Your battery is now charging and the charge will be automatically interrupted once
the battery is full.
12
Warning: If you are not familiar with charging batteries, read these instructions carefully. You
must use the proper settings to charge your batteries in a safe and reliable way. Using incorrect
settings can result in damage to personal property and be harmful to people. Always follow the
manufacturer's charge recommendations.
Follow this procedure to modify the charge settings to meet the battery requirements. From the main
screen, use "+" or "-" to select charge mode (indicated by CHARGE).
Every memory profile contains settings for each type of battery compatible with the charger. The new
settings will be automatically saved to the memory profile which is actually in use.
Use settings compatible with your battery, always follow the battery manufacturer's indications.
1. Press the ENTER key, the memory profile selection will blink; use the + or - keys to select the
memory profile you wish to use, from 1 to 10.
Team Orion Advantage Pro Spec www.teamorion.com

Modifying the charge settings

LiPo/LiFe battery charge screen NIMH/NICD battery charge screen
13