Extra Functions - Team Orion ProSpec Advantage Instruction Manual

Charge screen
Note: depending on the conditions of use, the charger thermal protection might activate so that
the charger can cool down. After a brief interruption the charge/discharge will resume and continue
normally.
26
Discharge screen
At the end of the storage charge cycle, the "BATTERY
STORAGE COMPLETE" message will appear.
Press the ENTER key to display the final charge data,
indicating the total charge time, total charged capacity (in
mAh) and the battery's final voltage.
Press the BATT TYPE key to display the battery internal
resistance and individual cell voltage in LiPo and LiFe
mode (if the balancing connector is used). Press the
ENTER key to go back to the storage screen.
Team Orion Advantage Pro Spec

Extra Functions

To switch the buzzer off (on by default), press and hold the - key while powering up the charger. To
switch the buzzer on, press and hold the + key while powering up the charger.
To display the actual input and output voltages, press and hold the BATT TYPE key from the charge
main screen.
The decrease - and increase + keys are also used to switch the LCD backlight on or off when the
charger is charging or discharging.
www.teamorion.com 27