Advertisement
All indicator lights are flashing at the same time.
One indicator light is flashing alternately.
Blender stops while blending
All indicator lights are flashing at the same time.
https://producthelp.kitchenaid.com/Countertop_Appliances/Blenders/Blender_Tips_and_Tricks/Diamond_Blender_Troublesho...
If Blender is plugged in, but nothing happens when
POWER is pressed, and all indicator lights are flashing,
the motor rotor may be locked. Press POWER; then
unplug the Blender. Plug it back in; then press POWER
and select the desired speed.
If the Blender is plugged in, but will not start and one
light is flashing alternately from all the other indicator
lights, the Blender may have a stuck key. Press POWER
to turn off the Blender; then unplug the Blender. Plug the
Blender back in and press POWER to turn back on to
reset the stuck key.
The Blender may be overloaded. If the Blender becomes
overloaded when blending heavy ingredients, it will
automatically shut off to avoid damage to the motor.
Press POWER to reset the Blender and unplug the
power cord. Remove the pitcher assembly from the base
and divide contents into smaller batches. Adding liquid to
the pitcher may also reduce the load on the Blender.
Updated: Wed, 19 Aug 2020 13:52:47 GMT
Powered by
2
Advertisement
