Advertisement
All indicator lights are flashing alternately.
Why is my blender blade turning but not mixing the ingredients?
Occasionally, when blending, the ingredients get stuck above the blade. This is called "bridging". When this occurs, the
rpm of the blender increases very quickly and the ingredients stop mixing as the blade is just turning in a pocket of air
inside the ingredients.
What to do:
Stop the blender and use a spatula to tamp down to "pop the bubble". You can also use a slower speed or use a bit
more liquid to get the viscosity or thickness of the mix to come down.
Blender Lights Flashing
CLICK HERE
for information and troubleshooting on flashing lights for various models.
Blender Jar Difficult to Attach or Remove
If your blender jar has become suddenly difficult to attach or remove without great force, please
Oily Residue on Bottom of Jar
There are bearings in the blender that allow it to run smoothly and quietly. It is normal that as the blender is used, you
may see residual oil from the bearings on the bottom of the blender jar. This oily residue can be wiped clean. It is more
noticeable on clear blender jars.
If these suggestions did not help, please
If you would like to download or view product literature for your appliance, please visit our
https://producthelp.kitchenaid.com/Countertop_Appliances/Blenders/Blender_Tips_and_Tricks/Diamond_Blender_Troublesho...
The Blender may be jammed. If it is jammed, the
Blender will stop running to avoid damage to the motor.
Press POWER to reset the Blender and unplug the
power cord. Remove the pitcher assembly from the base
and, with a scraper. free the blades by breaking-up or
removing the contents at the bottom of the pitcher.
Contact Us
or visit our
Service
Contact
Locator.
Manuals and Literature
Updated: Wed, 19 Aug 2020 13:52:47 GMT
Us.
page.
Powered by
3
Advertisement
