Sony NW-A25 How To Use Manual page 146

Help Guide
The BD address (alphanumeric code) of your Walkman is displayed
under the model name on the Walkman. When the Bluetooth device
displays the receiver's BD address, make sure that the BD
addresses displayed on the device and on the Walkman are the
same. (Some Bluetooth devices may not display the receiver's BD
address.)
A pairing process is performed when the device establishes a
Bluetooth connection with your Walkman for the first time. When
authentication codes (alphanumeric codes) appear on the Walkman
and on the Bluetooth device, check that they are the same.
5. Press the button (
Your Walkman is released from standby status.
Hint
The received content is stored in the "RECEIVED" folder of the device
selected in step 3 above. Although your Walkman can receive files in
unsupported formats, these files cannot be displayed or played. You
need to use Windows Explorer or the Mac Finder to search for them in
the "RECEIVED" folder.
If files of the same name are received, a file number is added between
the filename and extension.
If your Walkman receives files in unsupported formats, these files
cannot be displayed or played.
Note
If the pairing or transfer times out and stops, send the content from the
Bluetooth device again.
Content transfer may fail if the Bluetooth device is too far from your
Walkman, or there is interference from other devices. In these cases,
reduce the distance between the Walkman and the Bluetooth device,
and keep a good distance from other devices or turn them off if
possible.
Playback stops when your Walkman receives content.
146 sur 237
) after receiving content.
http://helpguide.sony.net/dmp/nwa20/v1/en/print.html
08/06/16 16:25