Sony NW-A25 How To Use Manual page 144

Help Guide
The copyright warning message appears when you send a file.
Follow the on-screen instructions.
3. Display the option menu and select [Search for a Device].
The [Scan Peripheral Device] screen is displayed.
Skip this step if you have sent content to the same device before.
4. Select the desired device.
Check the BD address (alphanumeric code) displayed under the
model name to make sure that the BD address on the screen
matches that of the Bluetooth device. To locate the BD address of
the Bluetooth device, refer to the operating instructions supplied with
the device.
A pairing process is performed when the device establishes a
Bluetooth connection with your Walkman for the first time. When
authentication codes (alphanumeric codes) appear on the Walkman
and on the Bluetooth device, check that they are the same.
A message confirming the connection appears and file transfer
begins.
5. Check that the content transfer is completed.
Exit the content reception standby status on the Bluetooth device.
To cancel pairing
Press the button (
If the Bluetooth device is not detected
[No devices found; ensure a device is available to connect with, and
search again via the Option menu.] is displayed if the Bluetooth device is
not detected by your Walkman. Search for the Bluetooth device again by
displaying the option menu and selecting [Search Again].
If the pairing is not completed
The screen for aborting the connection appears if the pairing fails to be
completed and the screen returns to where you are asked to select [Add
Device (Pairing)]. Perform this operation again from the [Scan Peripheral
144 sur 237
) while pairing.
http://helpguide.sony.net/dmp/nwa20/v1/en/print.html
08/06/16 16:25