Troubleshooting - Electrolux E5HB1-51GG Instruction Manual

MASHING QUANTITIES AND PROCESSING TIMES
ACCESSORY: POTATO MASHER*
INGREDIENTS
Cooked-potato pieces,
cooked-pumpkin pieces
(size 20 x 20 x 20 mm)
PROCESSING QUANTITIES AND PROCESSING TIMES
ACCESSORY: FOOD PROCESSOR WITH MULTI KNIFE*
INGREDI-
QUANTITY
ENTS
Bread 50-100 g
crumbs
100-200 g
Almonds
200-400 g
Meat (Beef) 200 g

TROUBLESHOOTING

PROBLEM
The blades are not turning
when the appliance is in
operation.
The chopper does not
work.
The mixing foot/whisk
assembly does not work.
The appliance sounds like
it is not able to process the
load.
Slices are slanted or uneven. The food is light, it jumps during
Some food remained on the
disc after processing.
The motor slows down when
using the multi knife.
The motor does not work.
The appliance vibrates/
moves during operation.
12
QUANTITY
300 g
QUAL-
TIME
ITY
10 sec
-
Coarse
10 sec
10 sec
POSSIBLE CAUSE
There are too much food in the
beaker.
The size of the food is too big.
There are food stuck around the
blades.
The chopper lid is not correctly
fastened.
The mixing foot/whisk assembly is
not correctly assembled.
The speed may be incorrect.
slicing.
It is normal for small pieces to
remain after processing.
Amount of meat may exceed
maximum capacity.
Too much fat in the meat.
The appliance is not connected to
the mains outlet.
The non-slip ring is wet.
TIME
30 sec
QUAL-
QUAL-
TIME
ITY
ITY
20 sec
10 sec
Medium
20 sec
20 sec
SOLUTION
Split the food into 2 batches or more.
Reduce the size of the food.
Use a spatula to gently scrap away the
food around the blade.
Ensure that the chopper bowl bowl lid
and the chopper bowl are properly
assembled.
Ensure that the mixing foot/whisk
assembly is correctly assembled and
locked in position.
Please refer to the processing guide of
the respective accessories.
Load food in the filler hole. Place
stopper onto food and apply pressure.
Then start.
Always clear any blocked food from
shredding/cutting disc manually.
Remove the meat and process in two
batches.
Note that for best result trim the meat of
fat before processing.
Make sure to plug in the appliance
before operation.
Make sure the non-slip ring at the
bottom of the all-purpose bowl or the
blender jug is clean and dry.
SPEED
High speed
TIME SPEED
30 sec
20 sec
Fine Turbo
30 sec
30 sec
www.electrolux.com