Visioneer NETSCAN 4000 User Manual page 35

28 V N
ISIONEER ETSCAN
Network Setting : Used to specify the scanner's network settings.
Item
DHCP Enable If you have a DHCP server available on your network and the
IP Address
Subnet Mask
Gateway IP
DNS Server
* Factory Default
Mail Server : Used to specify the scanner's mail server information.
Item
Device E-mail
Address
OutBox Server
(SMTP) IP or
URL
Port #
Authentication
Method
Login Name
Password
4000 U ' G
SER S UIDE
Description
DHCP has been enabled, the IP address, subnet mask, gateway, and
DNS server will be automatically given.
Choice: ON, *OFF
The Internet Protocol (IP) address assigned to your machine by your
network administrator.
The subnet mask address assigned by your network administrator.
The gateway IP address assigned by your network administrator.
The Domain Name Server assigned by your network administrator.
Description
Device E-mail Address Account
Enter the email address of the device. This is also the default "From"
address when you are sending email from the device.
Enter the SMTP IP or SMTP URL address.
Enter the port number of the SMTP server.
* 25
Enter the email authentication method.
Choice: *None, SMTP, POP3
Enter the login name for SMTP or POP3 authentication.
Enter the password for SMTP or POP3 authentication.